
New technique for turning sunlight into hydrogen
A team of Korean researchers, affiliated with UNIST has recently pioneered in developing a new type of multilayered (Au NPs/TiO2/Au) photoelectrode that boosts the ability of solar water-splitting to produce hydrogen. According to the research team, this special photoelectrode, inspired by the way plants convert sunlight into energy is capable of absorbing visible light from the sun, and then using it to split water molecules (H2O) into hydrogen and oxygen.
This study is a collaboration among scientists, including Prof. Jeong Min Baik (School of Materials Science and Engineering, UNIST), Prof. Jae Sung Lee (School of Energy and Chemical Engineering, UNIST), Prof. Heon Lee (School of Materials Science and Engineering, Korea University), and Prof. Jonghwa Shin (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology).
This multilayered photoelectrode takes the form of two-dimensional hybrid metal-dielectric structure, which mainly consists of three layers of gold (Au) film, ultrathin TiO2 layer (20 nm), and gold nanoparticles (Au NPs). In a study, reported in the January 21, 2016 issue of Nano Energy, the team reported that this promising photoelectrode shows high light absorption of about 90% in the visible range 380-700 nm, as well as significant enhancement in photo-catalytic applications.
Many structural designs, such as hierarchical and branched assemblies of nanoscale materials have been suggested to increase the UV-visible absorption and to enhance water-splitting efficiency. However, through incorporation of plasmonic metal nanoparticles (i.e. Au) to TiO2 structures, their photoelectrodes have shown to enhance the photoactivity in the entire UV-visible region of solar spectrum when compared to the existing ones, the team reports.
Prof. Jeong Min Baik of UNIST (School of Materials Science and Engineering) states, “Several attemps have been made to use UV-based photoelectrodes for hydrogen production, but this is the first time to use the metal-dielectric hybrid-structured film with TiO2 for oxygen production.” Moreover, according to Prof. Baik, this special type of photoelectrode uses approximately 95% of the visible spectrum of sunlight, which makes up a substantial portion (40%) of full sunlight. He adds, “The developed technology is expected to improve hydrogen production efficiency.”
Prof. Heon Lee (Korean University) states, “This metal-dielectric hybrid-structured film is expected to further reduce the overall cost of producing hydrogen, as it doesn’t require complex operation processes.” He continues by saying, “Using nanoimprint lithography, mass production of hydrogen will be soon possible.”
Prof. Baik adds, “This simple system may serve as an efficient platform for solar energy conversion, utilizing the whole UV-visible range of solar spectrum based on two-dimensional plasmonic photoelectrodes.”
This work was supported by the Pioneer Center Program through the National Research Foundation of Korea (NRF) grant, funded by the Korean government (MSIP). It has been also equivalently funded by the 2014 Research Fund of UNIST (Ulsan National Institute of Science and Technology), as well as by the KIST-UNIST partnership program.
Journal Reference:
Joonmo Park, Hee jun Kim, SangHyeon Nam, Hyowook Kim, Hak-Jong Choi, Youn Jeong Jang, Jae Sung Lee*, Jonghwa Shin*, Heon Lee*, and Jeong Min Baik* “Two-dimensional metal-dielectric hybrid-structured film with titanium oxide for enhanced visible light absorption and photo-catalytic application”. Nano Energy. (2016).
Source: Solar Thermal Magazine
Trackbacks and pingbacks
No trackback or pingback available for this article.
Categories
Recent Posts
- SolarEdge – Fully Integrated Optimized Solar PV! February 8, 2021
- Fox LV5200 Low-Voltage Battery IN STOCK January 30, 2021
- IN STOCK – The Upgraded Third Generation Pylontech Battery January 12, 2021
- Solar investment tax credit extended at 26% for two additional years (USA) January 3, 2021
- Fronius Solar Inverters Review 2020-2021 December 12, 2020
- Optimizing solar PV systems: Planning, hardware selection and monitoring December 3, 2020
Archives
- February 2021 (1)
- January 2021 (3)
- December 2020 (2)
- November 2020 (5)
- October 2020 (8)
- September 2020 (3)
- August 2020 (2)
- July 2020 (5)
- June 2020 (7)
- May 2020 (5)
- April 2020 (6)
- March 2020 (6)
- February 2020 (5)
- January 2020 (6)
- December 2019 (7)
- November 2019 (5)
- October 2019 (4)
- September 2019 (3)
- August 2019 (3)
- July 2019 (4)
- June 2019 (5)
- May 2019 (5)
- April 2019 (1)
- March 2019 (2)
- February 2019 (7)
- January 2019 (8)
- December 2018 (6)
- November 2018 (4)
- October 2018 (6)
- September 2018 (7)
- August 2018 (6)
- July 2018 (5)
- June 2018 (5)
- May 2018 (10)
- April 2018 (8)
- March 2018 (8)
- February 2018 (2)
- January 2018 (8)
- December 2017 (10)
- November 2017 (7)
- October 2017 (13)
- September 2017 (16)
- August 2017 (10)
- July 2017 (11)
- June 2017 (7)
- May 2017 (15)
- April 2017 (14)
- March 2017 (11)
- February 2017 (11)
- January 2017 (8)
- December 2016 (5)
- November 2016 (5)
- October 2016 (3)
- September 2016 (7)
- August 2016 (3)
- July 2016 (4)
- June 2016 (1)
- May 2016 (20)
- April 2016 (17)
- March 2016 (12)
- February 2016 (12)
- January 2016 (12)
- December 2015 (13)
- November 2015 (17)
- October 2015 (17)
- November 2014 (6)
Leave a reply