Silentwind Yacht Mast Mounting Kit 2 on Sale

Silentwind Yacht Mast Mounting Kit 2

£249.90 excl. VAT

  • Mast footing, 2 turnable deck fittings, 2 mast clamps (without mast) for 48,3mm mast (interior 44mm)
  • EAN: 0609224542107
Send an inquiry
Insert name
Insert mail
Insert message

Quantity:

Description

This Silentwind Mast Mounting Kit is designed for poles with 48mm outside diameter and is suitable for the installation of wind generators, radar-units, satellite antennas or any other technical equipment. It can be used on sailboats and for land use. The mast foot is made swivelling and can thus be mounted on horizontal and inclined surfaces.

The mast foot and the mast clamps are mounted in rubber elements, in order to prevent vibration and noise transmission the best possible way. The rubber-damping part of the mast base can be adapted to different inner mast tube diameters. A cable guide is integrated in the mast foot.

The cables must not be leaded to the outside of the mast and therefore the wires are not visible and perfectly protected. During the development care was taken to allow a simple installation and maintenance.

Silentwind Mast Mounting Kit Features:

  • Suitable for a mast with 48 mm outside diameter (11/2“ – tube)
  • Rubber adapter sleeve enables the use of tubes with different wall thicknesses
  • Made of polished stainless steel
  • Swiveling and adjustable mast foot suitable for the mounting on horizontal and inclined undergrounds
  • Adjustable mast stays
  • All mounting points rubber elements are included, in order to avoid noise- and vibration transmission
  • Integrated cableguide
  • Quick and easy installation
  • Easy maintenance by swivelling mast
  • Designed storm-proof!

silentwind wind generator logo

Established in 1993, Rulis Electrica, Lda is a Portuguese company with German management. Silentwind has thirty years of experience and know-how acquired through their work on small wind turbines on marine vessels under particularly difficult conditions, especially on the Portuguese coast and in Atlantic crossings.

The company` initial activity for the area of small wind turbines was the development of low noise rotor blades made of 100% carbon fiber material, hand-laminated and UV-resistant. These blades were introduced in 2008 as replacement parts for a wind generator well known on the market as very noisy. They were previously sold by Spreco, a member company of the group. Due to their great success, Silentwind decided to develop and manufacture our own appropriate wind generator for our silent power blades. The best wind turbines from NASDAQ, Bloomberg and Fortune 500 listed wind generator manufacturers at best price; suitable for all weather conditions. 

Related links to the Silentwind Mast Mounting Kit 1 :

DIY Wind Packages and Wind Turbines on zerohomebills.com by solaranna

Shop DIY Wind Generator, Wind Turbines, Kits and Complete Systems

Buy Wind Energy Products

solar charge-controllers-for off-grid-solar pv systems

Small wind turbines can be a cost-effective way to generate renewable electricity for your home. As a general rule of thumb, if the average annual wind speed on your property is less than 5 meters per second, it’s likely not a suitable location for a small wind turbine.

Depending on the size and capacity, some turbines are able to pay for themselves within a period of 10-15 years. The average wind turbine can offer a net benefit to its owner in as little as 5 months from the time of installation.
In short, YES. Putting in a wind turbine or any other renewable energy system is indeed an investment. To begin with, if you live in a truly remote area and want to go off-grid, installing renewable energy systems will often be less expensive than paying the utility company to extend a power line to your property.

A 1.5-kilowatt wind turbine will meet the needs of a home requiring 300 kilowatt-hours per month in a location with a 14 mile-per-hour (6.26 meters-per-second) annual average wind speed. To help you determine what size turbine you’ll need, first establish an energy budget.

Varies country by country. In the UK for example, only the first installation of any wind turbine would be permitted development, and only if there is no existing air source heat pump at the property. Additional wind turbines or air source heat pumps at the same property requires an application for planning permission. In general we would say that both the local building regulations and the permitted noise levels set by local authorities effect the installation.

Rules vary by city, so it is important to research local ordinances before deciding whether wind power is a viable option. How big does a backyard turbine need to be? It depends. A general guideline is that the turbine needs to be 30 feet higher than any object, including trees, within a 300-foot radius. noise levels must be kept under 35db.

We strongly advise against mounting wind turbines on rooftops or buildings, as they will receive only weak and turbulent winds. Several field trials have found that building-mounted turbines perform poorly, producing only a small fraction of the energy they would produce if properly sited.

A small wind turbine that is rated at 400 watts, would produce an average of 40 watts per hour at a particular location. Note: power available in the wind, increases by a “cube” factor, as related to increases in wind speed. Thus if the wind speed doubles (2 times as much speed), the power available goes up by 2x2x2 = 8 times.

Wind is a more efficient power source than solar. Compared to solar panels, wind turbines release less CO2 to the atmosphere, consume less energy, and produce more energy overall. In fact, one wind turbine can generate the same amount of electricity per kWh as about 48,704 solar panels

Buy Wind Charge Controller and Inverter

Wind Energy Controllers for Sale

Why Choose Wind and Sun Energy? Why Go Solar With Us?

0Bills DIY Store is a leading online solar and wind energy supply store serving European and American homeowners and businesses. We design and supply quality Solar Power Kits and System Packages both ready assembled and custom tailored for your needs. Our retail and wholesale pricing reflects the relationships we carry with the manufacturers we stock, ensuring the best deals for our customers.

We carry everything you need for your grid tied or off-grid system. Our Solar PanelsInvertersEnergy Storage, Solar Accessories and Mounting are second to none in quality, reliability, efficiency and lifespan. When going solar with us, we help you every step of the way in sourcing the products that matter for your investment.

Let us design and supply your solar panel system for less using the best products in the solar industry. We are proud to be a preferred distributor for solar installers, SMEs, Governments, leading universities and DIY solar homeowners.

Shop confidently with us and receive expert technical help from start to finish. Watch your investment produce free renewable energy for years to come!

ELECTRICAL WIND ENERGY COMPONENTS & ACCESSORIES on Sale

Electrical, Wind Energy Components & Accessories

Wind Accessories & Mounting

Additional information

Weight 2 kg
Dimensions 20.5 × 16.5 × 9.5 cm
Product Category

Wind Power, Wind Power Mounting and Accessories

Brand

SilentWind

There are no reviews yet.

Add your review

Silentwind Mast Mounting Kit

If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us.

Silentwind Mast Mounting Kit 1 for Sale

Article No : 390748
Manufacturer : Silentwind
Product Weight : 1.62 kg
Packed Weight : 2.00 kg
Dimensions : 205 x 165 x 95 mm (LxWxH)
Shipping : Parcel Post

silentwind logo on zerohomebills.com by solaranna

Established in 1993, Rulis Electrica, Lda is a Portuguese company with German management. Silentwind has thirty years of experience and know-how acquired through their work on small wind turbines on marine vessels under particularly difficult conditions, especially on the Portuguese coast and in Atlantic crossings.

The company` initial activity for the area of small wind turbines was the development of low noise rotor blades made of 100% carbon fiber material, hand-laminated and UV-resistant. These blades were introduced in 2008 as replacement parts for a wind generator well known on the market as very noisy. They were previously sold by Spreco, a member company of the group. Due to their great success, Silentwind decided to develop and manufacture our own appropriate wind generator for our silent power blades.