Steca Solarix MPPT 1010 Solar Charge Controller 12 – 24V
£124.75 excl. VAT
- High efficiency maximum power point tracker
- Wide input voltage range
- Automatic battery voltage detection
- Full load protection
Description
The Steca Solarix MPPT 1010 Solar Charge Controller 12 – 24V is a solar charge controller with Maximum Power Point Tracking. It is specially designed to work with all established module technologies and is optimized for solar systems with module voltages higher than the battery voltage. The Steca Solarix MPPT 1010 Solar Charge Controller 12 – 24V is especially qualified in combination with grid tied solar modules. The advanced MPP-tracking algorithm from Steca assures that the maximum available power of the solar generator is charged to the batteries. The Steca Solarix MPPT with latest technology ensures full performance in all conditions, a professional battery care combined with modern design and excellent protection.
Main features of the Steca Solarix MPPT 1010 Solar Charge Controller 12 – 24V
Product features
- Maximum Power Point Tracker (MPP tracker)
- Voltage and current regulation
- Automatic load reconnection
- Temperature compensation
- Positive earthing of one or negative earthing of several terminals possible
- Monthly equalisation charge
Electronic protection functions
- Overcharge protection
- Deep discharge protection
- Reverse polarity protection of module, load and battery
- Reverse polarity protection by internal fuse
- Automatic electronic fuse
- Short circuit protection
- Overvoltage protection at module input
- Open circuit protection without battery
- Reverse current protection at night
- Overtemperature and overload protection
- Load disconnection on battery overvoltage
Displays
- Multifunction LED display
- Multi-coloured LED
- 5 LEDs show operating states
- for operation, state of charge, fault messages
Options
- Evening or night light function pre-set in the factory or adjustable via Steca PA RC 100
- Parameterisation of function values via Steca PA RC 100
Accessories
- Steca PA RC100
- External temperature sensor Steca PA TS10
Steca Elektronik GmbH from Germany was founded by Mr Steinle and Mr Casperhas. The company long stood for ideas and innovations as an electronic manufacturing services (EMS) provider and manufacturer of Steca brand product lines in solar electronics and battery charging systems. Our capability and personal responsibility allow us all to create high-quality individual electronic products and to distribute them on a global scale. Simple business processes, fair partnerships and transparent communication are perceptible and contribute to our joint success. Join our ZERO Home Bills Community. BEST Products from the BEST Brands at the BEST Prices available in your market on ZEROhomebills.com delivered by Solaranna.
Categories: CHARGE CONTROLLERS, Solar Photovoltaic (PV), DUO, MPPT
Tags: 12V Charge Controllers, 24V Charge Controller, Charge Controllers, MPPT, Off-Grid Charge Controllers, Steca, Steca Solarix
Brand: Steca
Additional information
| Weight | 0.900 kg |
|---|---|
| Dimensions | 18.7 × 15.7 × 6.8 cm |
| Product Category | CHARGE CONTROLLERS, MPPT, SOLAR PHOTOVOLTAIC (PV) |
| Brand | Steca |
| Rating | 12 V, 24 V |
Add your review
You must be logged in to post a comment.
Steca Solarix MPPT 1010 Solar Charge Controller 12 – 24V
Technical data
| MPPT 1010 | MPPT 2010 | |
|---|---|---|
| Characterisation of the operating performance | ||
| System voltage |
12 V (24 V)
|
|
| Nominal power |
125 W (250 W)
|
250 W (500 W)
|
| Max. DC-DC efficiency |
98.3 % (Ubatt=24 V; Uin=30 V; P=0.6*Pnom)
|
|
| European efficiency |
94.7 % (Ubatt=12 V; Uin=30 V); 96.7 % (Ubatt=24 V; Uin=30 V)
|
|
| European efficiency (weighted across all Ubatt and Uin) |
95.2 %
|
|
| Static MPP efficiency |
99.9 % (DIN EN 50530)
|
|
| Dynamic MPP efficiency |
97.7 % (DIN EN 50530)
|
|
| Weighted REW (Realistic Equally Weighted efficiency) |
92.8 %
|
|
| Own consumption |
10 mA
|
|
| DC input side | ||
| MPP voltage |
15 V (30 V) < Umodule < 75 V
|
15 V (30 V) < Umodule << 100 V
|
| Open circuit voltage solar module (at minimum operating temperature) |
17 V … 75 V (34 V … 75 V)
|
17 V … 100 V (34 V … 100 V)
|
| Module current |
9 A
|
18 A
|
| DC output side | ||
| Load current |
10 A
|
|
| Reconnection voltage (LVR) |
12.5 V (25 V)
|
|
| Deep discharge protection (LVD) |
11.5 V (23 V)
|
|
| Battery side | ||
| Charge current |
10 A
|
20 A
|
| End-of-charge voltage |
13.9 V (27.8 V)
|
|
| Boost charge voltage |
14.4 V (28.8 V)
|
|
| Equalisation charge |
14.7 V (29.4 V)
|
|
| Set battery type |
liquid
|
|
| Operating conditions | ||
| Ambient temperature |
-25 °C … +40 °C
|
|
| Fitting and construction | ||
| Terminal (fine / single wire) |
16 mm² / 25 mm² – AWG 6 / 4
|
|
| Degree of protection |
IP 32
|
|
| Dimensions (X x Y x Z) |
187 x 153 x 68 mm
|
|
| Weight |
900 g
|
|
Steca Elektronik GmbH from Germany was founded by Mr Steinle and Mr Casperhas. The company long stood for ideas and innovations as an electronic manufacturing services (EMS) provider and manufacturer of Steca brand product lines in solar electronics and battery charging systems. Our capability and personal responsibility allow us all to create high-quality individual electronic products and to distribute them on a global scale. Simple business processes, fair partnerships and transparent communication are perceptible and contribute to our joint success. Join our ZERO Home Bills Community. BEST Products from the BEST Brands at the BEST Prices available in your market on ZEROhomebills.com delivered by Solaranna.
Manuals
Product data sheet
Certificates
- adjustable via Steca PA RC100: reconnection voltage, deep discharge protection, end of charge voltage, boost charge voltage, equalisation charge, battery type
- Inverters must not be connected to the load output.
- CAUTION: If an open circuit voltage of more than 75 V or 100 V is supplied to the connected solar module, the controller will be destroyed. When selecting the solar module, it is important to bear in mind that the open circuit voltage should never exceed 75 V or 100 V over the entire working temperature range. When using solar modules with a maximum open circuit voltage of between 60 and 100 V (over the entire temperature range), all installation steps must be carried in accordance with protection class II.
There are no reviews yet.