Studer MBC 24-03/1 3A 24V Battery Charger

Studer MBC 12-15/1 15A 12V Battery Charger

  • IP65 battery charger switch mode, 3-step charging current: 15A output voltage: 12 VDC phases supply: 1 main supply: 230 VAC +- 10% 50 Hz
  • Dimensions: 195 x 100 x 47 mm  (L x W x H) at 1kg
  • The Studer MBC 12-15/1 15A 12V Battery Charger comes with 10 year guarantee as standard
Send an inquiry
Insert name
Insert mail
Insert message
SKU: STUDER-MBC-12-15/1-15A-12V Categories: , , Tags: , , , , Brand:

Description

The Studer MBC 12-15/1 15A 12V Battery Charger provides specific charging for 1, 2 or 3 banks of batteries in accordance with the battery manufacturers specification. Entirely automatic with built-in charge distribution they can remain permanently connected to the batteries in complete safety. MBC chargers are protected against polarity reversal and transient short-circuits.

Buy Studer MBC 12-15/1 15A 12V Battery Charger

This charger is made for all types of lead-acid chargeable batteries, including GEL batteries. It is a fully automatic charger with an UI charging characteristic. The Studer MBC 12-15/1 15A 12V Battery Charger can permanently be connected to the battery without the risk of overcharging. When the battery is fully charged the charger automatically switches over to the floating charging. This will continue until the charger is switched off. The charger automatically starts the mains charging mode after a mains-break. The charger is waterproof (IP65).

Main Features of the Studer MBC 12-15/1 15A 12V Battery Charger

  • IP65 battery charger switch mode
  • 3-step charging
  • 1 main supply: 230 VAC +/- 10%, 50 Hz
  • Frequency: 50Hz
  • Ingress Protection: IP 65

Installation of the Studer MBC 12-15/1 15A 12V Battery Charger

The charger can simply be placed in any position on a clean and dry surface using 4 screws or bolts. Connect the red wire to
the positive battery terminal and the black wire to the negative battery terminal. Connect the mains cable to a 230/115 Vac
mains voltage outlet.

studer charge controllers logo

The Swiss Studer Innotec SA was founded in 1987 by Roland Studer, current General Director. Since 1991, the company continues to develop its core competencies in the energy conversion. The Twinpower launch in 1994, then the SI launch in 1995; two sine wave inverters with many years of unbeatable performances, make Studer Innotec’s offer very attractive to demanding foreign markets.

Related links to the Studer MBC 12-15/1 15A 12V Battery Charger :

solar charge-controllers-for off-grid-solar pv systems

Are Studer Innotec off-grid inverters and charge controllers any good?

Studer Innotec was established in Switzerland in 1987 and is a reputable manufacturer of inverters, MPPT solar charge controllers and inverter chargers. Studer Innotec’s products are not just made of high-quality components, they are designed specifically to have a long lifespan and are extremely reliable to give you that extra peace of mind.

What size battery charger do I need?

As a rule of thumb your battery charger should be a minimum of 10% of the Ah rating of the battery. E.g A 100Ah battery would require a 10 Amp charger as a minimum. To prevent overcharging you should keep the charger size to within 20% of the total capacity.

How many amps do I need to charge a 24 volt battery?

25 amp
Most battery manufacturers recommend sizing the charger at about 25% of the battery capacity (ah = amp hour capacity). Thus, a 100 ah 24 volt battery pack would take about a 25 amp 24 volt charger (or less). Larger chargers may be used to decrease charge time, but may decrease battery life.

How many solar panels does it take to charge a 100ah battery?

Charging your battery at 12 volts and 20 amps will take five hours to charge a 100 amp hour battery. By multiplying 20 amps by 12 volts, 240 watts is how big of a panel you would need, so we’d recommend using a 300w solar panel or 3 100 watt solar panels.

How do you calculate solar panel to battery?

Take the power produced by the solar panels and divide by the voltage of the batteries. For example: Example: A solar array is producing 1 kw and charging a battery bank of 24V. The controller size is then 1000/24 = 41.67 amps.

Is a higher Ah battery better?

The batteries with higher amp hours deliver more power and more performance, allowing the battery to work for a longer time on a full charge as compared to the cells with lower amp hours. As the AH or amp-hours rating of the battery indicates the consumers about the amperage that a battery will provide in one hour.

How can you tell if a 12 volt battery is still good?

If your battery is reading 0 volts, chances are the battery experienced a short circuit. If the battery cannot reach higher than 10.5 volts when being charged, then the battery has a dead cell. If the battery is fully charged (according to the battery charger) but the voltage is 12.5 or less, the battery is sulfated.

How do you match a solar panel to charge controller?

The exception to this rule is when using solar panels smaller than 5 Watts. Select a charge controller that is compatible with the system voltage. The standard configurations are 12, 24, and 48 volts. If you are wiring your batteries for 24 volts you need a charge controller that is rated at 24 volts.

Buy Solar Charge Controller / Regulator

Charge Controllers for Sale

Why Choose Wind and Sun Energy? Why Go Solar With Us?

0Bills DIY Store is a leading online solar and wind energy supply store serving European and American homeowners and businesses. We design and supply quality Solar Power Kits and System Packages both ready assembled and custom tailored for your needs. Our retail and wholesale pricing reflects the relationships we carry with the manufacturers we stock, ensuring the best deals for our customers.

We carry everything you need for your grid tied or off-grid system. Our Solar Panels, Inverters,  Energy Storage, Solar Accessories and Mounting are second to none in quality, reliability, efficiency and lifespan. When going solar with us, we help you every step of the way in sourcing the products that matter for your investment.

Let us design and supply your solar panel system for less using the best products in the solar industry. We are proud to be a preferred distributor for solar installers, SMEs, Governments, leading universities and DIY solar homeowners.

Shop confidently with us and receive expert technical help from start to finish. Watch your investment produce free renewable energy for years to come!

on grid grid tied solar pv inverters

Buy Solar Power Inverter

Buy Solar Power Inverter

solar pv accessories

Electrical, Solar Components & Accessories for Sale

Solar Accessories

Additional information

Weight 2 kg
Dimensions 19.5 × 10 × 4.7 cm
Product Category

Battery Chargers, Battery Inverters and Chargers
Brand

Studer
Rating

12 V

There are no reviews yet.

Add your review

Studer MBC 12-15/1 15A 12V Battery Charger

If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us.

Studer MBC 12-15/1 15A 12V Battery Charger for Sale

Article No : STIN104343
Manufacturer : Studer
Product Weight : 2.00 kg
Packed Weight : 2.00 kg
Dimensions : 195 x 100 x 47 mm (LxWxH)
Shipping : Parcel Post
EAN :
RRP : 286.00 excl. Tax

The Swiss Studer Innotec SA was founded in 1987 by Roland Studer, current General Director. Since 1991, the company continues to develop its core competencies in the energy conversion. The Twinpower launch in 1994, then the SI launch in 1995; two sine wave inverters with many years of unbeatable performances, make Studer Innotec’s offer very attractive to demanding foreign markets.studer charge controllers logo

 

These products are rooted in the start of Studer Innotec’s export sales, which now account for more than 90% of the company turnover.

Today, Studer Innotec SA is one of the world leaders in the inverter market. The company  also manages a network of more than hundred « Distributors » around the world. Thanks to its exceptionally extensive products range, it is the only inverter manufacturer able to collectively cover the solar, nautical, mobile, backup and telecom markets. The company’s philosophy has always been to master the complete process; from the development to product sale. This is why Studer Innotec SA, since its beginning, is a company vertically integrated; therefore capable of far greater flexibility than its competitors.

Studer Innotec’s high-tech concept of its products as well as the choice for performance and reliability drive Studer Innotec SA to choose its components with the greatest care. This the reason why the company has choosen the latest technologies; such as the digital signal processors (DSP) that provide higher efficiency to its inverters.

Studer Innotec is an ISO enterprise that develops and manufactures its products entirely in Switzerland. It also confirms its commitment to an efficient and sustainable energy environment supplying to the market high quality products.

Related Products