Victron Battery Monitor BMV 700

£109.90 excl. VAT

Victron Energy
  • Supply voltage range: 6,5 – 95 VDC
  • Operating temperature range: -40 +50°C (-40 – 120°F)
Send an inquiry
Insert name
Insert mail
Insert message

In stock

Quantity:

Description

Monitor your battery with the Victron Battery Monitor BMV 700. The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), temperature or midpoint voltage (see below).

Victron Battery Monitor BMV 700 near to me

Easy to install

All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance; a securing ring for the rear mounting and screws for the front mounting.

Easy to program

A quick install menu and a detailed setup menu with scrolling texts assists the user when going through the various settings. Please consult the manual for details.

New: midpoint voltage monitoring (BMV-702 only)

This feature which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank. A battery bank consists of a string of series connected cells. The midpoint voltage is the voltage halfway along the string. Ideally, the midpoint voltage would be exactly half of the total voltage. In practice, however, deviations will be seen, dependent on many factors such as a different state of charge for new batteries or cells, different temperatures, internal leakage currents, capacities and much more. Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery. Please consult the BMV manual for more information.

Standard features

  • Battery voltage, current, power, ampere-hours consumed and state of charge
  • Time to go at the current rate of discharge
  • Programmable visual and audible alarm
  • Programmable relay, to turn off non critical loads or to run a generator when needed.
  • 500 Amp quick connect shunt and connection kit
  • Shunt selection capability up to 10.000 Amps
  • VE.Direct communication port
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
  • Wide input voltage range: 9,5 – 95 V
  • High current measurement resolution: 10 mA (0,01A)
  • Low current consumption: 2,9 Ah per month (4 mA) @12V and 2,2 Ah per month (3mA) @ 24V

BMV-702 additional features

Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings.

BMV 700HS: 60 to 385VDC voltage range

No prescaler needed. Note: suitable for systems with grounded minus only (battery monitor is not isolated from shunt).

Other battery monitoring options of the Victron Battery Monitor BMV 700

  • VE.Net Battery Controller
  • High voltage VE.Net Battery Controller: 70 to 350VDC
  • Lynx Shunt VE.Net
  • Lynx Shunt VE.Can

Victron Battery Monitor BMV 700 logo

Victron Energy B.V. designs and sells power solutions for automotive, industrial, marine, mobility, off-grid, and telecom markets. Its products include inverters, chargers, inverter/chargers, isolation transformers, autotransformers, battery monitors, batteries, panels and system monitoring products, DC distribution systems, transfer switches, cables, battery isolators and combiners, DC/DC converters, battery protection products, multipower products, solar products, solar charge controllers, and solar inverters and panels. The Company was founded in 1975 and is based in Almere Haven, the Netherlands.  The best DIY off grid solar products from NASDAQ and Bloomberg listed solar components manufacturers at best price; suitable for all weather conditions. 

Related links to the Victron Battery Monitor BMV 700 :

victron-inverters victron charge controllers victron battery inverter and chargers
The Netherlands
Victron Energy, based in the Netherlands, have been manufacturing power conversion equipment since 1975 and become well known around the world for producing reliable off-grid battery inverter/chargers, inverters and a wide range of quality, affordable solar controllers.

An inverter/charger would convert the AC power from the generator (wind, solar and hydro) to charge the DC battery bank. An off grid inverter/charger would be converting the power in both directions, from AC to DC to charge the battery from the AC generator, and converting the DC power from the battery to AC for your appliances.

Top 5 Solar battery inverter chargers for off-grid solar systems:
  • Victron Energy – Multiplus and Quattro
  • SMA Technology AG – Sunny Island
  • Selectronic
  • Outback
  • Morningstar

” .. I have a Quattro 10K and it doesn’t have an internal anti islanding device and therefore I’m not allowed to have it grid tied in South Africa, unless I install an external anti islanding device. My question is, if I need anti islanding when I configure the grid in VE Configure to “None”.. ”

Internal Multi and Quattro anti-islanding isolation relay is not redundant and that is the main problem with implementation in most part of the word, not speed. AFAIK only in UK is not mandatory to have redundancy, hence two independent disconnecting relays.

Prepare to invest in a Victron Multiplus invertercharger that can handle at least 1.5 times the load that you have. In the case of a 3,000 watt continuous demand on your property you will want at least a 4,500 watt invertercharger. In an off-grid solar system configuration the peak power capability is also extremely essential in order to accommodate your power needs.

The Victron MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Models: 500VA, 800VA, 1200VA, 1600VA, 2000VA, 3000VA, 5000VA. The Victron Multiplus is suitable both for grid tie and off-grid solar panel systems.

Buy Victron Energy Charge controller, Battery Inverter and Inverter Charger

Victron Blue Energy for Sale

Why Choose Wind and Sun Energy? Why Go Solar With Us?

0Bills DIY Store is a leading online solar and wind energy supply store serving European and American homeowners and businesses. We design and supply quality Solar Power Kits and System Packages both ready assembled and custom tailored for your needs. Our retail and wholesale pricing reflects the relationships we carry with the manufacturers we stock, ensuring the best deals for our customers.

We carry everything you need for your grid tied or off-grid system. Our Solar PanelsInvertersSolar Accessories and Mounting are second to none in quality, reliability, efficiency and lifespan. When going solar with us, we help you every step of the way in sourcing the products that matter for your investment.

Let us design and supply your solar panel system for less using the best products in the solar industry. We are proud to be a preferred distributor for solar installers, SMEs, Governments, leading universities and DIY solar homeowners.

Shop confidently with us and receive expert technical help from start to finish. Watch your investment produce free renewable energy for years to come!

solar charge-controllers-for off-grid-solar pv systems

Buy Solar Charge Controller / Regulator

Charge Controllers for Sale

Additional information

Weight 0.300 kg
Product Category

Accessories and Mounting, Energy Storage, Display and Monitoring, Energy Storage Mounting, SOLAR PHOTOVOLTAIC (PV)

Brand

Victron

Rating

12 V, 24 V, 48 V, 12V, 24V, 48V

There are no reviews yet.

Add your review

Victron Battery Monitor BMV 700

If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us.

Victron Battery Monitor BMV 700 on Sale at better price than Amazon or Ebay

  • Supplier Part No: BAM010700000
  • Weight: 0.27 kg
  • GTIN code: 8719076020066
  • GTIN masterbox: 8719076028895
  • Country of origin: Malaysia
  • Intrastat statistical code: 85371098
  • USA statistical code: 8504.90.75-00
  • Net weight: 0.74
  • Gross weight: 1.067
  • Carton size: 6.5x21x21cm
  • Quantity per masterbox: 10
  • Quantity per pallet: 300

Victron Battery Monitor BMV 700 logo

Victron Energy B.V. designs and sells power solutions for automotive, industrial, marine, mobility, off-grid, and telecom markets. Its products include inverters, chargers, inverter/chargers, isolation transformers, autotransformers, battery monitors, batteries, panels and system monitoring products, DC distribution systems, transfer switches, cables, battery isolators and combiners, DC/DC converters, battery protection products, multipower products, solar products, solar charge controllers, and solar inverters and panels. The Company was founded in 1975 and is based in Almere Haven, the Netherlands.

DATA SHEET

CERTIFICATES

MANUAL

SYSTEM SCHEMATICS

SOFTWARE DOWNLOAD

WHITEPAPERS