Introducing Schletter Solar Mounting Solutions to the ZEROhomebills.com portfolio, offering a variety of fasteners, roof hooks, clamps, rails and hanger bolts for pitched and flat and slate, metal and tiled roofs.
View our mounting product range now >>
.
Why choose Schletter:
Schletter have over 30 years of experience as a professional manufacturer of solar mounting systems.
The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years.
Benefits of using Schletter products:
- The Schletter PV-mounting system is a modular-unit assembly system comprising universally applicable, quality components (aluminum / stainless steel), facilitating the installation of any module on virtually any site.
View our mounting product range now >>
.
The different components for pitched roofs – customizable to any solution
The wide range of components and systems facilitates the fastening of almost any module configuration to almost any roof. Quick mounting times and sustained durability are achieved through the deployment of high-quality and sophisticated components in conjunction with a structural analysis. Schletter offers both roof-parallel and elevated solutions for pitched roofs; simply choose the most appropriate solution for your own roof project.
.
MOUNTING PARALLEL TO THE ROOF
Schletter Standard
- One-layer mounting rack
- 2 cross beams per module row
- Module clamps for framed modules also available with potential equalization
- Can be combined with all system components by Schletter
- Simple mounting
- economically priced
View our mounting product range now >>
.
GridNorm
- Cross rail system for unfavorable fastening points
- Wide spans are possible
- In many cases, a reduction of the number of fastening points is possible
- Exact aderence to the fastening points
- Flexible mounting
- Can be combined with all system components by Schletter
- Can be assembled using inexpensive standard rails
View our mounting product range now >>
.
LaQ07
- Horizontal mounting of the modules on shared bearing rails
- Only possible if the cross beams can be placed at any desired spot
- Only a few rails are needed
- Optimum support of the modules
- Cost optimization by linear support
View our mounting product range now >>
.
Option – Rapid2+ system
- 2 horizontal cross beam profiles per module row
- Vertical module mounting
- Fastening to the substructure using roof hooks
- Special fastening elements are possible
- Middle, end and earthing clamps
- Considerably reduced mounting time
- Only 4 components (only little storage space required)
- Convenient mounting
View our mounting product range now >>
.
ELEVATED MOUNTING
System FixZ-7
- Slight elevation on trapezoidal sheet metal for framed modules (elevation angle of 5 – 7°)
- Designed for vertically mounted framed modules with heights from 1.3 m to 1.7 m.
- Mainly fastened using trapezoidal sheet metal clamps
- Fast and easy to mount
- Better rear-ventilation
- Better self-cleaning
- Optimum load transfer by means of the roof cladding
- Extra yield with favourable system price
View our mounting product range now >>
.
CompactDirect
- Direct fastening of triangle supports to the roof construction, for example on roofs with east-west inclination, elevation toward the south
- Fastening using hanger bolts or special fastenings
- Swift assembly
- Centric load transfer
- Stable aluminum construction
- Inexpensive module elevation
- Several combination options
View our mounting product range now >>
.
CompactVario
- Multi-row elevation with interconnected module rows
- Especially for purlin roofs aligned to the south
- Fastening using special fastenings (for example FixT)
- Fast and easy to mount
- Program-generated structural verifications
- Optimum load transmission
View our mounting product range now >>
.
CompactGrid
- Horizontal mounting beams underneath the module row
- Applicable on purlin roofs with east-west alignment with fixation to the substructure or with south alignment with fastening using Fix2000 trapezoidal sheet metal clamps
- Fast and easy to mount
- Program-generated structural verifications
- Optimum load transmission
View our mounting product range now >>
.
FLAT ROOF MOUNTING
The most economical solution for a flat roof is that which results from optimal customization of the mounting system to the target roof structure. A number of support geometries with different inclinations and dimensions are therefore used for Schletter flat roof systems, in full compliance with the latest technical standards. The wide range of accessories allows for installation on almost any roof. A customized plan with a detailed structural analysis is drawn up for every system, based on data provided by the customer.
Our flat roof systems meet the latest standards and can be enhanced by means of numerous potential accessories.
.
LOADING SOLUTIONS
AluGrid
- Available with 10° or 15° inclination
- System structural analysis based on the latest research on wind dynamics
- Additional “+” Version: Clamping at the long side of the modules
- Quick, simple and mainly tool-free mounting
- Reduced number of components
- Economically efficient
View our mounting product range now >>
.
CompactDirect
- The triangular supports are loaded with concrete block loading kits, SolRack or SolCube
- Inclination angles can be chosen in steps of 1°
- Swift assembly
- Centric load transmission
- Stable aluminium construction
- Inexpensive module elevation
- Several combination options
View our mounting product range now >>
.
CompactVario
- Elevation with interconnected module rows
- Individually applicable
- The triangular supports are loaded using SolRack or SolCube
- Rules out any “keeling over” of loaded solar plants
- Reduction of required loads
- Program-generated structural analyses
View our mounting product range now >>
.
Vegetated roof
- For vegetated roofs or roof with gravelling
- Supports with bigger clearance height (about 400mm)
- Utilization of the substrate / the gravelling as a loading
- Minimization of the required loading by coupling of several rows (CompactVario)
- Sufficient distance on vegetated roofs
- Optimized structural analysis
- Available with inclinations from 15 – 30° in steps of 5°
View our mounting product range now >>
.
Windsafe
- System with rear wall covering, especially for the reduction of uplifting loads
- Can be used in combination with CompactDirect or CompactVario, for example
- Unit assembly system for individual project planning
- Considerable reduction of the required loading
- Simple and swift loading
- Considerably reduced load onto the roof construction
View our mounting product range now >>
.
FlatGrid
- Cost-efficient system for slightly inclined flat roofs
- Basically, FlatGrid is available right now. As the system so far has only been used in a few projects, we will create an individual offer for you on request.
- Roof-parallel (flush mount)
- Unit assembly system that can be combined with numerous Schletter components
- Only little superimposed loads required
- Integrated surface protection mat
- Optimized in material and cost
- Schletter Configurator
View our mounting product range now >>
.
FixGrid
- Latest generation of flat roof solar plants of any desired size
- Modules are arranged in closed rows with a fixed tilt angle of 6° or 13°
- Minimum superimposed loads
- No additional fastening of the mounting systems through the roof cladding required
- System optimized in both material and tool requirements
View our mounting product range now >>
.
FASTENING TO THE SUBSTRUCTURE
IsoTop
- For roofs of industrial buildings with wide spans
- Fastening to the girders of the hall
- Object planning on the basis of an individual structural analysis software
- Reduced loading of the roof substructure
- Direct load application into the supporting structure of the building
- Optimization and minimization of the number of roof penetrations
- Improved connection details
View our mounting product range now >>
.
LOADING KITS
SolRack
- Aluminum (standard) or plastic plate made of recycled material
- Especially for roofs with gravelling
- Alternatively, a loading with concrete weights is possible
- economically priced
- UV-resistant and non-ageing
- can be mounted swiftly
- Good drainage effect on vegetated roofs
View our mounting product range now >>
.
SolTub
- SolTub is available in different sizes and can be combined
- High loadings are possible
- Optimizations with Windsafe are possible
- Individual modification to special module arrangements
- Modular design
- Minimum superimposed load
- All-metal construction
To read more about Schletter visit the manufacturer site here.
To learn more about how to install a Schletter Solar Mounting System visit our Youtube Channel HERE.
Trackbacks and pingbacks
No trackback or pingback available for this article.
Leave a reply
You must be logged in to post a comment.